|
(Top - Back of LCD)
(Bottom - Motherboard w/ PIC controller)
(Click Picture to Enlarge)
(With Temp Humidity Board)
(Note: LCD is mounted to Motherboard)
(Click Picture to Enlarge)
(With Analog/Digital Board)
(Click Picture to Enlarge)
(With Counter/Timer Board)
(Click Picture to Enlarge)
|
Intro
PIC Trainer
This
kit teaches you how to use a micro-controller (uC) for measuring temperature (in
either degrees F or deg (C), humidity, as a counter, as a timer and for analog
to digital conversion. The code to support all these functions is contained
within the one programmed uC. The kit uses three plug-in units to a motherboard
which has an 2x16 LCD on-board.
Specifications:
- Includes a pre programmed 16C711-04/P PIC
(CK1708 recommended to modify PIC Program)
- Requires 9 Volts DC power supply.
(Need a Power Supply?)
- Full schematics, circuit explanation & documentation provided.
See
K75.pdf for complete
details, including schematic and theory of operation. Requires Adobe
Acrobat Reader available at
www.adobe.com
for FREE!
Download source code
k75_source.zip
(you must
download software here, it is not included in the kit) |
