TELEVISION, CABLE, SATELLITE, ETC.
Please Note: Plans do not include any
parts!!!
PLAN3002 - VIDEO TAPE STABILIZER
This set of plans show you how to build a video stabilizer that
eliminates any problems in duplicating VCR tapes. No more copyguard problems. Built-in RF
modulator stabilizes the Sync of copyguard tapes for viewing or copying.
PLAN3002 - Video Tape Stabilizer .............. $12.95 
PLAN3004 - MICROWAVE (MDS) RECEIVING SYSTEM
These plans will allow the home builder to construct a receiver for
microwave transmissions (the kind used for re-broadcasting signals received from satellite
receivers to cable and other users). Easily built with these easy to follow, 27 page,
step-by-step instructions, for as little as $150.00. Receive commercial-free TV right in
your own home.
PLAN3004 - Microwave (MDS) Receiving System ... $12.95  
PLAN3007 - TV VIDEO MODULATOR
Use this modulator to interface video cameras, TV games, computers, or
other video sources directly to your TV antenna terminals. Tunable so that the TV may be
set at a channel (VHF) which is not being used in your area. Does not affect the normal
usage of the TV.
PLAN3000 - TV Video Modulator ...................... $12.95 
PLAN3011 - FIBERGLASS PARABOLIC SATELLITE ANTENNA
Build a commercial grade fiberglass parabolic antenna with these
comprehensive plans. Includes directions for making a mold and antenna. Once mold is made,
turn out an antenna every few days for less than $200.00 in materials. Create a very
profitable business. Most fiberglass antennas retail in the $900-$1500 price range. Twenty
page manual provides all instructions, diagrams, mounting instructions, aiming
information, etc.
PLAN3011 - Fiberglass Parabolic Satellite Antenna ... $12.95 
PLAN3012 - METAL SATELLITE ANTENNA
Build a high quality metal frame parabolic antenna from materials
available from most hardware stores. Can usually be built for much less than $200.00 in
materials. Will receive all satellites and all channels. Large 20 page manual provides
step-by-step directions, diagrams, aiming information, mounting instructions, etc.
Everything you need to know to make a working satellite receiving antenna.
PLAN3012 - Metal Satellite Antenna .................. $12.95 
PLAN3014 - SATELLITE TV RECEIVER
Along with the antenna and LNA, a major component of a satellite TVRO
system is the receiver. These plans allow home construction of a commercial quality TVRO
receiver at quite a savings over purchasing one. Our 29 page manual leads you step-by-step
through all assembly and includes 30 illustrations and diagrams. Can be built in just a
few evenings.
PLAN3014 - Satellite TV Receiver ..................... $12.95 
PLAN3015 - SATELLITE TVRO LNA
Because the LNA, or (Low Noise Amplifier) is a key component of a TVRO
satellite system, we have developed a LNA with very low noise GaAs FET transistors to
allow the construction of a quality LNA for about $100.00.
PLAN3015 - Satellite TVRO LNA ..................... $12.95 
PLAN3018 - VHF-UHF SCANNER PRE-AMP
This pre-amp was designed primarily for scanners but it has been found
to be very effective in amplifying any weak signals for use on ham receivers,
oscilloscopes and frequency counters. Modern stripline circuitry allows a 12 to 20 dB gain
over the frequency range of 3 to 700 MHz with usable gain up to 900 MHz, with a noise
figure of less than 2 dB. Easy to build in about 1 hour.
PLAN3018 - VHF-UHF Scanner Pre-Amp .......... $12.95 
PLAN3019 - UHF TV PRE-AMP
Many of our customers expressed an interest in a TV pre-amp for UHF
channels which would have high gain while filtering out VHF and FM signals. This pre-amp
has been designed to do just that. This pre-amp features a minimum of 25 dB gain over the
entire UHF TV band while an input filter attenuates frequencies below 500 MHz. Stripline
circuitry and microwave type transistors provide for a noise figure below 3 dB across the
band. Simple and inexpensive to build.
PLAN3019 - UHF TV Pre-Amp ....................... $12.95 
|